This will provide stability for the camera and reduce any camera shake that could affect the sharpness of the image. Evaluative metering is the best choice for most situations. This determines how the camera determines the exposure for the image. Higher settings, such as ISO 800 or even higher, are best for indoor and low-light images. Lower settings, such as ISO 100 or ISO 200, are best for outdoor images with lots of light and for landscapes. This is the camera’s sensitivity to light. This will allow the camera to select the most appropriate settings for the image you are attempting to capture. Set the camera to a “P” or Program mode.A standard zoom lens, such as the Canon EF-S 18-55mm f/3.5-5.6 IS II, is often included with the camera and is adept at a variety of types of photography. Attach a lens to your Canon Rebel T3 camera body.I used a polarizing filter to add two stops of exposure to this shot, thus allowing for a longer exposure time under the midday sun.Ĭontinue reading here: Sorting Your Shots For The Multiimage Panorama You will find more discussion on filters in the bonus chapter. Think of it as sunglasses for your camera lens. This allows you to use slower shutter speeds during bright conditions (Figure 7.20). The neutral density filter is typically just a dark piece of glass that serves to darken the scene by one, two, or three stops. The polarizing filter redirects wavelengths of light to create more vibrant, accurate colors, reduce reflections, and darken blue skies. To overcome this obstacle, you need a filter for your lens- either a polarizing filter or a neutral density filter. There is a possibility that you will not be able to have a shutter speed that is long enough to capture a smooth, silky effect, especially if you are shooting in bright daylight conditions. If the exposure were any longer, I would have definitely needed to use a tripod. The Image Stabilization feature allowed me to handhold this shot. You will need to have the Highlight Alert feature turned on to check for overexposure (see "How I Shoot" in Chapter 4). If the water is blinking on the LCD, indicating a loss of detail in the highlights, then use the Exposure Compensation feature (as discussed earlier in this chapter) to bring details back into the waterfall. Take a photo and then check the image on the LCD. Check to see if the shutter speed is 1/15 or slower.Ħ. Press the shutter button halfway so the camera takes a meter reading.ĥ. Using Av mode, set your aperture to the smallest opening (such as f/22 or f/36).Ĥ. For the best quality, make sure the ISO is set to 100.ģ. Attach the camera to your tripod, then compose and focus your shot.Ģ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |